RS485 port
When it comes to these inverters, you will need an Self-crimp RS485 cable using the terminal plug configuration below:
| 1 | RS485 A |
| 2 | RS485 B |
If you buy any random USB RS485 cable on Amazon, Ebay, Takealot, etc. which doesn't specifically state that it supports the inverter, it may not work. You can read more about the communication chips we recommend using here.
Steps in SolarAssistant
On the configuration page, select "Senergy" as your inverter model.
Select the USB port(s) where you have inverters connected. There will typically be one option.
Click connect:
Parallel installations
With these inverters you will need to connect each inverter with its own cable.
Troubleshooting
If you have any issue, please try the official Senergy application from a laptop. If it works with these official applications, then it should work with SolarAssistant.