RS232/COM port
Use a Voltronic USB RS232 cable cable plugged into the
inverter port labelled "RS232" or "COM".
Alternatively you can use the WiFi dongle cable with a
USB serial cable You can read more about the
communication chips we recommend using here, and the
pin configuration below:
| Pin 1 | RX |
| Pin 2 | TX |
| Pin 8 | GND |
Steps in SolarAssistant
On the configuration page, select "Sumry" as your inverter model.
The cable you plugged in should show up as a USB port:
Click connect:
Parallel installations
With these inverters you will need to connect each inverter with its own cable.